The Autonerdz Community Forums - Pico 4000 Series Scope

Rich Barton Super Nerd Picogroup Offline Pico_Power Posts: 1,357 Iowa Iowa USA Gender:	Pico 4000 Series Scope Jan 10^th, 2009 at 7:03am Hi Group, I see there is a 4000 series scope out. It looks like there is some added stuff that might be usefull, like the sensor signal simulator,would this scope be worth using as a mobile scope in the field and keep my 3000 series at the shop on the boom? Any input welcome
Back to top	Rich Barton C.R.B. Diagnostic's IP Logged

Tom Roberts Autonerdz Administrator Picogroup Offline Autonerdz Founder Posts: 8,595 Olympia Washington USA Gender:	Re: Pico 4000 Series Scope Reply #1 - Jan 10^th, 2009 at 7:43am Hi Rich, The 4000 series does look very promising. I don't see that they have a signal generator though. Where did you see that? Imagine what that 32meg memory could do.....with dual 80MHz ADCs. And 12bit resolution too. I advise patience......
Back to top	Tom Roberts Forums Administrator IP Logged

Wilf Super Nerd Picogroup Offline Never too old to learn Posts: 814 Winnipeg, Manitoba, Canada Manitoba Canada Gender:	Re: Pico 4000 Series Scope Reply #2 - Jan 10^th, 2009 at 8:54am Rich Do you mean this http://www.picotech.com/precision-oscilloscopes.html I searched the Pico site and that is all I could find Tom Is the pressure transducer available yet? Also, is there only one model cuz I would like to go to 1000 lbs Wilf
Back to top	IP Logged

Tom Roberts Autonerdz Administrator Picogroup Offline Autonerdz Founder Posts: 8,595 Olympia Washington USA Gender:	Re: Pico 4000 Series Scope Reply #3 - Jan 10^th, 2009 at 9:51am Wilf, Quote: Is the pressure transducer available yet? Unfortunately no. Still no release date I am aware of. Quote: Also, is there only one model cuz I would like to go to 1000 lbs One model, as far as I know. Up to 500psi scaling. Why would you want 1000psi?
Back to top	Tom Roberts Forums Administrator IP Logged

Danny Berry, Sr.

Super Nerd
Picogroup

Offline

Elevation 840ft

Posts: 710

McDonough, Ga.
Georgia
USA
Gender: male

Re: Pico 4000 Series Scope
Reply #4 - Jan 10^th, 2009 at 10:54am

Rich Barton wrote on Jan 10^th, 2009 at 7:03am:

Hi Group,

I see there is a 4000 series scope out.

It looks like there is some added stuff that might be usefull, like the sensor signal simulator,would this scope be worth using as a mobile scope in the field and keep my 3000 series at the shop on the boom? Undecided

Any input welcome

Rich,

Do you mean that it has a Spectrum analyzer built in?

Is this like what you see when you are a running Demo versions with the 3000 series scope?

Danny

Back to top

IP Logged

Rich Barton Super Nerd Picogroup Offline Pico_Power Posts: 1,357 Iowa Iowa USA Gender:	Re: Pico 4000 Series Scope Reply #5 - Jan 11^th, 2009 at 6:45am Hi Group, Well it sure has been busy ,I guess I must have seen that wrong because I sure don't see it now, maybe it was the 5000 series does this one have a signal genrator? I had just got up and was drinking my coffee Sorry to get you guys excited,I was too. Have a good week end
Back to top	Rich Barton C.R.B. Diagnostic's IP Logged

Carl Grotti LSD Guide Picogroup Offline Deceased Posts: 1,501	Re: Pico 4000 Series Scope Reply #6 - Jan 11^th, 2009 at 12:33pm Rich, Quote: maybe it was the 5000 series does this one have a signal genrator? That would be correct. http://www.picotech.com/picoscope5200-awg.html
Back to top	Carl Grotti Forum Moderator IP Logged

TCROfreak Senior Member Offline Posts: 194 Gender:	Re: Pico 4000 Series Scope Reply #7 - Jan 24^th, 2009 at 12:27am I found on Pico Tech that there is a 2200 series scope that has an AWG the price is right at $263-$487 USD here is a link. http://www.picotech.com/picoscope2200-specifications.html#buy
Back to top	Howard Keck I am not as normal as I look IP Logged

Rich Barton

Super Nerd
Picogroup

Offline

Pico_Power

Posts: 1,357

Iowa
Iowa
USA
Gender: male

Re: Pico 4000 Series Scope
Reply #8 - Jan 24^th, 2009 at 6:35am

TCROfreak wrote on Jan 24^th, 2009 at 12:27am:

I found on Pico Tech that there is a 2200 series scope that has an AWG the price is right at $263-$487 USD here is a link.
http://www.picotech.com/picoscope2200-specifications.html#buy

Hi TCROfreak,
Good find Smiley

.
I wish this was in the 3000 series Smiley

This could be used at the same time as we are using our 3000 series scope.

I have a 09 honda accord with can issues and this could be used to generate the signal to a module that is not getting it ,then I could follow the wiring with my 3000 scope or this tool to narrow down the bad wire.

Tom, how much is just the 2200 series box from you, and what is the good and bad on it.

Also how much is just a 5000 series box from you?

Also does the 5000 series use all the same leads and stuff that the 3000 series does?

Smiley

Back to top

Rich Barton
C.R.B. Diagnostic's

IP Logged

Tom Roberts Autonerdz Administrator Picogroup Offline Autonerdz Founder Posts: 8,595 Olympia Washington USA Gender:	Re: Pico 4000 Series Scope Reply #9 - Jan 24^th, 2009 at 7:57am Rich, Give me a call. We can discuss the options...
Back to top	Tom Roberts Forums Administrator IP Logged

Rich Barton Super Nerd Picogroup Offline Pico_Power Posts: 1,357 Iowa Iowa USA Gender:	Re: Pico 4000 Series Scope Reply #10 - Jan 24^th, 2009 at 2:23pm Tom Roberts wrote on Jan 24^th, 2009 at 7:57am: Rich, Give me a call. We can discuss the options... Hi Tom, I will call you on monday morning. Have a good week end.
Back to top	Rich Barton C.R.B. Diagnostic's IP Logged

	Welcome, Guest. Please Login or Register