Autonerdz Home Autonerdz FAQ Userís Comments Autonerdz Events Autonerdz Store Contact Autonerdz
  Welcome, Guest. Please Login or Register
Autonerdz - Since 2000, North America's Authority on PicoScope
  HomeHelpSearch Member Map Event CalendarRegisterLogin  
secondary waveform captures (Read 2,427 times)
Freshman Member

I'm an Autonerd

Posts: 7

secondary waveform captures
Oct 3rd, 2017 at 4:02am
Anybody have a look over these secondary captures made on a 16 valve 1.6 renault scenic.I used a cop extension lead to directly look at the secondary.I think 3 and 4 have issues.all at idle speed.
Main symptoms are intermittent power,to full power with no pattern hot cold etc.The car  can improve after being left after a run but not always
Back to top

cylinder_2_001.psdata (1428 KB | 320 )
cylinder__1.psdata (1093 KB | 239 )
cylinder__3.psdata (1421 KB | 219 )
cylinder__4.psdata (1418 KB | 247 )
IP Logged
Super Nerd

Posts: 1,230

lake stevens, Washington, USA
lake stevens

Gender: male
Re: secondary waveform captures
Reply #1 - Oct 3rd, 2017 at 10:31am
IMO, KV seems a little high but burn time frame is around 1.3 to 1.5 MS,  which is good, don't see anything in the rise or fall of the burn which looks offensive. In my opinon they look pretty good and 3-4 don't look much different than 1-2.

Would like too see some scan data over pico looking @ fuel trims (miss fire data ect) and the like as I don't see this as an ignition issue. You stated 3 and 4 has issues, what is your basis for that?

Also do a volumetric effeciency to validate engine health and breathing issues.


Back to top
IP Logged