The Autonerdz Community Forums

The Autonerdz Community Forums
https://www.autonerdz.com/cgi/yabb2/YaBB.pl General Public Area >> PicoScope >> Will 4423 scope run with a USB B to USB C cable?? https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1622805778 Message started by SHIMHEAD on Jun 4^th, 2021 at 4:22am

Title: Will 4423 scope run with a USB B to USB C cable??
Post by SHIMHEAD on Jun 4^th, 2021 at 4:22am

Hello all,
I just picked up an ASUS T100HA that I will be using to run my Pico 4423 with. It has a USB 2.0 port on the keyboard and that works fine, but my question is can I run it through the USB C port on the side of the PC/Screen section?? I see plenty of cable options on Amazon, but they all seem to be listed as printer cables. That could be because of the USB B cable end which is common to many printers, but is that an issue for running the Pico?? Cheap enough to buy and try, but wanted to know beforehand if possible.

SHIMHEAD

Title: Re: Will 4423 scope run with a USB B to USB C cable??
Post by TrevorSchlientz on Jun 4^th, 2021 at 5:21am

Good morning.

I've been using a Cable Creation CC0066 adaptor from Amazon with 4423, 4425 and 4425A on my Dell here in the office for months.

I also have this USB C to USB B3.0 cable from Mono price that works very well. But it wont fir a 4423 scope. https://www.monoprice.com/product?p_id=38613

Title: Re: Will 4423 scope run with a USB B to USB C cable??
Post by SHIMHEAD on Jun 4^th, 2021 at 7:43am

I just found a Samsung USB A to USB C adapter that I already had. I will try it a bit later today and report back if it works. Thanks for the information!!