The Autonerdz Community Forums | |
https://www.autonerdz.com/cgi/yabb2/YaBB.pl
General Public Area >> PicoScope >> A Second Pico https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1156864788 Message started by rheipp on Aug 29th, 2006 at 8:19am |
Title: A Second Pico Post by rheipp on Aug 29th, 2006 at 8:19am
Tom,
If I bought a 3223 could I use it at the same time as my 212/50 by opening two windows or do I need to get the 3423? Bob |
Title: Re: A Second Pico Post by Tom Roberts on Aug 29th, 2006 at 8:48am
Hi Bob,
PicoScope can only operate one unit at a time. I have run a 212 and a 3000 simultaneously with one using PicoScope 5 and the other PicoScope 6 but neither are at full efficiency and are not synced, of course. If you want a four channel scope, I would go with our PicoQuad upgrade kit. Then you will have a true four channel with each channel synced to within 50 nanoseconds at all times. For all practical purpose, that's simultaneous sampling. The upgrade kit is a good value with all the goodies you need for two more channels. http://www.autonerdz.com/picoquad.htm#_Upgrade_to_PicoQuad |
Title: Re: A Second Pico Post by rheipp on Aug 29th, 2006 at 10:12am
Thanks Tom,
I'll have to save a few more shelks |
The Autonerdz Community Forums » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |