I realize there was another post in January asking how to get a secondary parade pattern on the Pico, but I’m having a heck of a time trying to get the parade pattern to work on cars with a distributor type ignition.  I have the 212-3 model.  Is there anyone out there using the 212-3 automotive that has a screen capture they could post of a secondary parade pattern?  I thought if I could see what the settings where, maybe I could have some success getting a pattern.  I’ve been using the two inductive pickups and putting Ch.A on the coil lead and using Ch.B on #1 plug wire as the trigger (auto) 3-27kv
I set up Ch.A using the automotive preset Ignition / Secondary / Distributor (king lead).

Thanks, Mike

Hi Mike,

You will find many examples in this thread:

http://www.autonerdz.com/cgi/yabb2/YaBB.pl?board=picopub;action=display;num=1077528814;start=0#0

You may want to consider joining the Autonerdz support group.  Why?  Read what members say:

http://www.autonerdz.com/picousers.htm

You can purchase this support here:

http://www.autonerdz.com/picokit.htm#_DOH!__I

You'll get a CD with hours of PicoScope training, plus ongoing support.  You'll find it to be an excellent investment.  It will save you a LOT of time and frustration.

Recently there was a PicoScope class put on by others who do not know the equipment nearly as well as I do.  It was a week long class that cost between one and two thousand dollars.  Now that it's over, it's over and the attendees are on their own.  The Autonerdz support system is only $350 and just like your learning curve...it doesn't end.  

Of course, the support is included with all kits purchased from Autonerdz at no extra charge.