The Autonerdz Community Forums | |
https://www.autonerdz.com/cgi/yabb2/YaBB.pl
General Public Area >> For Non-Technicians >> Can a Pulse generator wheel be responsable of..... https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1117851611 Message started by simo on Jun 3rd, 2005 at 7:20pm |
Title: Can a Pulse generator wheel be responsable of..... Post by simo on Jun 3rd, 2005 at 7:20pm
Hi guys i just need an answer from you guys.
I have a car with a spark timing fluctuation. The knock sensor is not seeing any knocking and the ecu has been replaced. The problem consist in - 15 degrees in spark timing. You can see it with the strobo light that the timing is in retard .The strange thing is that the ecu shows lets say 25 degrees advance but with the strobo you can only see 15. When i replaced the RPM sensor i noticed that the sensor was like hit by something and then i thought that maybe the pulse generator wheel has come loose or expanded with tie and broke. Do you think this could be the problem? Thanks in advance |
Title: Re: Can a Pulse generator wheel be responsable of. Post by NickUK on Jun 4th, 2005 at 11:19am
Hi Simo
Read reply in PM. I dont want to type it all out again :P |
The Autonerdz Community Forums » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |