The Autonerdz Community Forums
https://www.autonerdz.com/cgi/yabb2/YaBB.pl
General Public Area >> PicoScope >> Snap KV and primary current
https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1115311662

Message started by Tom Roberts on May 5th, 2005 at 9:47am

Title: Snap KV and primary current
Post by Tom Roberts on May 5th, 2005 at 9:47am
Here is a capture of snap KV and primary current from a Ford V8 351 with TFI 4 ignition:




And here a movie of this capture zoomed:

http://www.autonerdz.com/flash/21250snap.swf

Right click on the movie for the controls menu.

A PicoScope ADC 212/50 was used for this capture.  Save on trigger was used to capture several of these automatically by setting the trigger for the high KV snap and then just sitting in the drivers seat mashing the throttle a few times.

The Autonerdz Community Forums » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.