The Autonerdz Community Forums

The Autonerdz Community Forums
https://www.autonerdz.com/cgi/yabb2/YaBB.pl General Public Area >> Test Board >> TEST CAPTURE https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1311742364 Message started by PRESTONERR on Jul 26^th, 2011 at 9:52pm

Title: TEST CAPTURE
Post by PRESTONERR on Jul 26^th, 2011 at 9:52pm

capture from a 250,000 mile honda accord 2.2l engine, doesn't run bad whatsoever, just finished up T-belt water pump job and felt like scoping while purging the cooling system

https://www.autonerdz.com/cgi/yabb2/YaBB.pl?action=downloadfile;file=1996_HONDA_ACCORD_DX_2_2L_IGNITION_SECONDARY_AT_IDLE_SINGLE_FRAME.psdata (491 KB | )

Title: Re: TEST CAPTURE
Post by fisher on Jul 27^th, 2011 at 1:11am

Preston, I click the file and Pico dopwnloads but no capture; just the empty PICO scope screen.

Title: Re: TEST CAPTURE
Post by Tom Roberts on Jul 27^th, 2011 at 9:31am

Fisher,

Works here.

Are you using the latest beta?

Title: Re: TEST CAPTURE
Post by Danny Berry, Sr. on Jul 27^th, 2011 at 10:47am

Works fine for me too. Hey Tom I noticed on this beta version even if you double click on the file it will open up and even show all of the screen settings ...unlike the older versions where you would have to save the file and open it up after starting pico to get all of the details. 8-)

Title: Re: TEST CAPTURE
Post by Danny Berry, Sr. on Jul 28^th, 2011 at 11:35am

Quote:

Hey Tom I noticed on this beta version even if you double click on the file it will open up and even show all of the screen settings ..

Tom informed me that this will only happen if you have the scope attached when you open the data file. :-?
Oh well it would have been nice.... ;D

Danny

Title: Re: TEST CAPTURE
Post by Danny Berry, Sr. on Jul 28^th, 2011 at 11:49am

Preston and Fisher, I dont want to derail your post, but one other thing to clarify for all the nerdzs on my last post: And that is the pico doesn't have to be up and running to show the settings just attached to the usb port on the pc. 8-)

Danny

Title: Re: TEST CAPTURE
Post by fisher on Jul 28^th, 2011 at 1:25pm

Just days ago I reloaded Pico, maybe I missed the latest? I am using 6.5.78.5
I never had to open anything; if I clicked the link posted on this site, it took a minute but Pico opened up with the intended capture.
Not now though.

Title: Re: TEST CAPTURE
Post by fisher on Jul 28^th, 2011 at 1:37pm

So I went to the Mothersite and find that indeed, 6.5.78.5 just will not do. I am loading 6.5.8.