The Autonerdz Community Forums

The Autonerdz Community Forums
https://www.autonerdz.com/cgi/yabb2/YaBB.pl General Public Area >> PicoScope >> Picoscope and Labview https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1106123559 Message started by tchappui on Jan 19^th, 2005 at 12:32am

Title: Picoscope and Labview
Post by tchappui on Jan 19^th, 2005 at 12:32am

Hello,

I have the project to use a picoscope for online monitoring of two ac signal and phase measurment. For this purpose, I'like to interface picoscope software with Labview to automate tasks.

Did someone already try such an operation?

Best regards

Thierry

Title: Re: Picoscope and Labview
Post by Ricardo on Jan 19^th, 2005 at 7:12am

Hi Thierry,

I haven't personally used Labview with PicoScope but you will find a couple of examples on our website which may be useful. You will have to download the 'Drivers, Examples and Manuals' package (don't worry its free ;)) and once installed look for the '.vi' files.

http://www.picotech.com/software.html

Ric