The Autonerdz Community Forums
https://www.autonerdz.com/cgi/yabb2/YaBB.pl
General Public Area >> PicoScope >> Picoscope 300
https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1088723226

Message started by Harv on Jul 1st, 2004 at 4:07pm

Title: Picoscope 300
Post by Harv on Jul 1st, 2004 at 4:07pm
Well, looks like they are finally here!

Pretty impressive specs.  I really like the fact that it is pwered through the USB port.

When can I get a demo version on extended loan, Tom?

:D :D :D

Title: Re: Picoscope 300
Post by Tom Roberts on Jul 1st, 2004 at 5:01pm
Hi Harv,

Trust me.  That's not what you have been waiting for.  The direct USB is cool and it's USB powered, but beyond that it has little to offer the 212/50 can't.  You have larger buffers and faster processors available but they have some limitations that make them less suitable for automotive work:

  • It has 8 bit resolultion instead of 12 bit.

  • The minimum voltage range is 10mv/div

  • They are not compatable with the automotive software

They have an ADC for each channel but the buffers are shared.  I don't plan to stock these but can order you one if you like  ;)

I have a brochure I could send to you, if you want to take a look.  The 3204 is less scope than the 212/50 having equal speed and equal buffer, but less resolution and voltage ranges.  Hang in there Harv.....

Title: Re: Picoscope 300
Post by jarvissamuel on Jul 5th, 2004 at 1:12pm
I was just checking out the pico site and the 3000 scopes it lists a 3 percent accuracy this is less than the 212 models I think.  Check out the pico site for all the info.  The 1M buffer on the 3206 is truely insane.

Title: Re: Picoscope 300
Post by Tom Roberts on Jul 5th, 2004 at 8:56pm
Hi Sam,

You are correct.  Here is a great page from the Pico site that describes vertical resolution:

http://www.picotech.com/applications/resolution.html

The Autonerdz Community Forums » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.