The Coil-On-Plug (COP) ignition probe is the fastest way to check Coil-On-Plug ignition coils and spark plugs.

·         Find misfires fast

·         Gives scope patterns of the secondary, faster than scoping the secondary

·         Works on all labscopes capable of displaying ignition patterns

·         Suitable for use on most COP and conventional ignition systems

·         Long probe (36 cm / 14 inches including handle)

·         No batteries required

Like distributors, spark plug wires are starting to disappear from cars. With the new Coil-On-Plug (COP) ignition systems the ignition coils are connected directly to the spark plugs — eliminating the need for the spark plug wires. With no high-voltage spark wires, and associated wiring looms, COP ignition systems reduce manufacturing and repair costs, and improving ignition performance and reliability.

The Coil-On-Plug probe works with most COP systems; it requires no special adaptors, no foil strips, and no batteries. The Pico COP probe eliminates the need for back-probing: to use the probe simply press the probe against the coil.

Secondary ignition waveform captured using the Coil-On-Plug probe.

A  grounded BNC/BNC cable is included:

Cable length: 3 m (9.8 ft)
Earth cable length: 1.5 m
Earth cable position: 1.5 m from each end

This 3 meter BNC to BNC cable includes an earth cable to protect your scope from high voltage leaks from the ignition system. BNC connectors feature insulating rubber boots and cable strain relief to protect the cable.   This cable is included.

Along with testing COP systems, the Coil-on-Plug probe can also be used to obtain a secondary ignition waveform on conventional ignition systems.

Designed to save you time, effort and money, the Coil-On-Plug ignition probe is the fastest way to test both conventional and Coil-On-Plug secondary ignition systems.